Home/Dry mix gunite machine/GZ-3 electric driven dry-mix gunite machine

GZ-3 electric driven dry-mix gunite machine

Output Capacity : 3m3 /h

Max. Horizontal Conveying Distance : 200m

Suitable Mix Ratio(Cement/Sand) : ≤1:3~5

Max. Aggregate Size : Φ10 mm

Conveying Hose Inner Diameterr : Φ38/Φ50mm

Conveying Pressure : 0.2-0.4MPa(29-58PSI)

Introduction

GZ-3 electric driven dry-mix gunite machine is small-sized shotcrete machine for the dry spraying process.

GZ-3 shotcrete machine is available in following versions:
Basic: electric drive can be combined with tyre chassis.
Extended (optional): air motor or diesel drive combined skid or rail-wheel.

Features

1. Non-adhesion going-through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
2. Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.
3. Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dusk leak and prolong consumption parts life.
Application

GZ-3 shotcrete machine can be used as well for small jobs, such as joint filling, swimming pool, refractory application and extensive slope consolidation work, etc.

Product parameters

Electric motor driven gunite machine
Output Capacity 3m3 /h
Max. Horizontal Conveying Distance 200m
Suitable Mix Ratio(Cement/Sand) ≤1:3~5
Max. Aggregate Size Φ10 mm
Conveying Hose Inner Diameterr Φ38/Φ50mm
Conveying Pressure 0.2-0.4MPa(29-58PSI)
Air Consumption for conveying material 5~6m3/min(180-215CFM)
Material Charging Height 0.9m
Rotor Speed 14r/min
Motor Power 3kW(4hp),IP55
Available Voltage 220V,380V,440V,660V 50Hz/60Hz
Overall Dimension(length×width×height) 1.13×0.54×1.02m
Net Weight 430kg
 
 

Air Motor Driven Gunite Machine
Output Capacity 1.5-3m3 /h
Max. Horizontal Conveying Distance 200m
Suitable Mix Ratio(Cement/Sand) ≤1:3~5
Max. Aggregate Size Φ10 mm
Conveying Hose Inner Diameter Φ50mm
Conveying Pressure 0.2-0.4MPa(29-58PSI)
Air Consumption for conveying material 5~6m3/min(180-215CFM))
Air Motor Air Pressuret 0.5MPa(71PSI)
Material Charging Height 0.9m
Rotor Speed 14r/min
Air Motor Type TMH3.2
Air Motor Air Consumption 4.8m3/min(171CFM)
Overall Dimension(length×width×height) 1.13×0.54×1.02m
Net Weight 430kg(947lbs)

Diesel driven gunite machine
Rated Output 2-3m 3 /h
Max. Horizontal Conveying Distance 200m
Suitable Mix Ratio(Cement/Sand) ≤1:3~5
Max. Aggregate Size Φ 10 mm
Conveying Hose Inner Diametere 38/51mm
Operating air Pressure 0.2-0.4MPa(29-58PSI)
Air Consumption 5~6m 3 /min(180-215CFM)
Diesel Engine 10hp,2200rpm
Diesel Engine Starting Electric start
Clutch Type in Diesel Engine Automatic Clutch
Material Charging Height 0.9m
Rotor Speed 9-13r/min
Overall Dimension(L× W× H) 1.8× 0.8× 1.2m
Net Weight 480kg

Get a shotcrete machine quotation

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again.